How to unwrist

Take a minute to look at how to install Unwrist to make sure you have the best possible experience.

Step 1: Unbox Unwrist

Inside your box, you'll have your Unwrist Case, lanyard, and hex key for easy opening and closing.

Step 2: Free your watch

There are two small release buttons on the backside of the watch. Press them and slide out the strap.

Step 3: Open Unwrist

Using the provided hex key, unscrew each of the 6 screws. They don't have to come all the way out, a few turns should do the trick. Both front and back parts of the case should come loose.

Step 4: Insert The Watch

Place your Apple Watch face-first inside Unwrist. Make sure you feel a slight "click" when you install it. Once it feels seated, put the backside on.

Step 5: Button it up

Once your Apple Watch is properly seated, it's time to screw Unwrist back together. Use the hex key. Make sure it's snug, but don't over-tighten it.

Step 6: Enjoy Unwrist

You're good to go! Just make sure to turn ON your passcode and turn OFF wrist-detection so your battery lasts all day.